Technical Issues and Questions
-
nitin
- Joined: Sat Nov 08, 2014 10:49 am
Re: Technical Issues and Questions
there are clearly bad batches of the 820 out in the wild but I have one and my parents have one and they have been going strong for 4-5 years.
But before you buy another player, what tv model dl you have?
But before you buy another player, what tv model dl you have?
- denti alligator
- Joined: Thu Nov 04, 2004 1:36 am
- Location: "born in heaven, raised in hell"
Re: Technical Issues and Questions
I have a Sony Bravia 8. I went ahead and ordered an 820. The sub luminosity is a real issue. I watch too many movies with subtitles, so I need to be able to dim them. It's just too bad the 450 that I have doesn't have this feature (but the 420 does--though no DV).
I got DV to work. I had to select the regular "enhanced input" for HDMI, not the advanced enhanced. Go figure. And how I was supposed to know this? It's stated nowhere in the manual! Anyway, it works from the player, but not over the network. Not sure how to get that to work.
I got DV to work. I had to select the regular "enhanced input" for HDMI, not the advanced enhanced. Go figure. And how I was supposed to know this? It's stated nowhere in the manual! Anyway, it works from the player, but not over the network. Not sure how to get that to work.
-
nitin
- Joined: Sat Nov 08, 2014 10:49 am
Re: Technical Issues and Questions
ah yep, Sony TV HDMI settings are bafflingly more complicated than they should be
- denti alligator
- Joined: Thu Nov 04, 2004 1:36 am
- Location: "born in heaven, raised in hell"
Re: Technical Issues and Questions
Now I've got the age-old color uniformity issue with b&w movies. Greenish on the left side of screen; reddish on the right. How to adjust this?
-
nitin
- Joined: Sat Nov 08, 2014 10:49 am
Re: Technical Issues and Questions
is the tv on Professional or Cinema mode? If so, short of having it calibrated, I am not sure what the answer is
- denti alligator
- Joined: Thu Nov 04, 2004 1:36 am
- Location: "born in heaven, raised in hell"
Re: Technical Issues and Questions
Switched to Cinema Mode, which is a little better. Thankfully, most b&w white films are academy ratio, so the edges aren't visible.
- subliminac
- Joined: Sun Jul 17, 2005 5:21 am
- Location: Columbus, OH
Re: Technical Issues and Questions
Only remedy for this is to go with a QD-OLED. TVs with WOLED panels like those in the Bravia 8 and LG models will show tinting along the edges of the screen or when viewed off axis. It minor enough in color content to be unnoticeable but can be very apparent when viewing B&W movies.denti alligator wrote:Now I've got the age-old color uniformity issue with b&w movies. Greenish on the left side of screen; reddish on the right. How to adjust this?
Sent from my iPhone using Tapatalk
- swo17
- Bloodthirsty Butcher
- Joined: Tue Apr 15, 2008 2:25 pm
- Location: SLC, UT
Re: Technical Issues and Questions
Am I correct in thinking there's no way currently to get a 4K OLED TV that will also play content in 3D? I know the technology exists but just isn't popular. Are there no niche retailers that could custom-make such a TV for me?
- MichaelB
- Joined: Fri Aug 11, 2006 10:20 pm
- Location: Worthing
- Contact:
Re: Technical Issues and Questions
Are there any 4K TVs of any kind that can handle 3D? I’m under the impression that you have to go down the projector route for that.
- swo17
- Bloodthirsty Butcher
- Joined: Tue Apr 15, 2008 2:25 pm
- Location: SLC, UT
Re: Technical Issues and Questions
Here was one, but it's 10 years old. Like I said, the technology exists. In fact, that article mentions that 4K resolution is actually ideal for displaying 1080p content for each eye in 3D
- EddieLarkin
- Joined: Sat Sep 08, 2012 2:25 pm
Re: Technical Issues and Questions
I have kept my E6 for this reason, and the passive 3D is indeed phenomenal, far superior to the active 3D sets I'd had previously. It's certainly no good now though as a primary 4K HDR TV, only a 3D backup.
- MichaelB
- Joined: Fri Aug 11, 2006 10:20 pm
- Location: Worthing
- Contact:
Re: Technical Issues and Questions
I watch 3D via my Oculus Quest (or whatever it's called now), which has the major advantage of genuinely delivering a discrete image to each eye at the same level of brightness as any other video source.
- swo17
- Bloodthirsty Butcher
- Joined: Tue Apr 15, 2008 2:25 pm
- Location: SLC, UT
Re: Technical Issues and Questions
Is that just a headset and can it connect to a 3D Blu-ray player?